APPLICATION

Bayerol DPF Foam Cleaner regenerates heavily soot contaminated diesel particulate filters and recovers the filter capacity to avoid loss of power or other problems because of a clogged DPF, caused by short distance driving.

In addition, it can be used as a cure at the first sign of a problem with the diesel particulate filter regeneration cycle. This is usually indicated by the illumination of a warning light.

The product will prevent the eventual serious fouling of the diesel particulate filter, which will result in expensive replacement and possible consequences in other parts of the combustion system – for example the turbo charger. Bayerol DPF Foam Cleaner will improve the efficiency of the vehicle.

DESCRIPTION

Because of its easy application Bayerol DPF Foam Cleaner offers a quicker and in particular cheaper alternative to disassembling and cleaning a heavily soot contaminated diesel particulate filter at specialized external cleaning companies.

ADVANTAGES

• Allow the engine to cool down before using the product. The engine has to be cold and the DPF temperature below 40°C.
• Disassemble the temperature or pressure sensor at the upper site of the diesel particle filter.
• Shake the can before use and insert the extension nozzle in the opening with the spraying direction towards the filter.
• Spray the product into the filter, in 3 to 5 sprays, with an interval of 5 minutes between each spray. Use the whole can.
• Allow the product to soak for at least 30 minutes.
• Reassemble the temperature or pressure sensor.
• Start the engine and let it run idle. Dirty water contaminated with soot and ash will drip out of the exhaust pipe.
• Allow the engine to run idle until the dripping stops.
• Start the regeneration by performing a test drive for around 20 to 30 minutes at higher speed (approx. 60 mph or 100 km/h).